IC Split - Splitting Artwork

Post Reply
Posts: 115
Joined: Wed Oct 21, 2020 8:56 am



Open Artwork

Open the Artwork and make sure it is a PNG file and 300dpi and A3 Landscape.


Check Split

1) Look at the vertical lines running down the page, this is where the artwork will split.
By default you wont need to move them but if your artwork is too wide on one side, you can adjust the width by moving these vertical lines.

2) Check "Split Page Size" to make sure that each side would find comfortably into an A4 Document "21cm x 29.7cm".


Split Artwork

1) Click the "Split" button.

2) Choose the relevant option.


Save Artwork

1) Click the "Save As" button.

2) Save it as PDF with a new file name.


Split Documents

The artwork is split; as shown.

Ready to print!
Post Reply