Multi Trans and Metallic onto Acrylic

Post Reply
TransferPaper
Posts: 117
Joined: Wed Oct 21, 2020 8:56 am


Image

Image

Image



Print

Multi Trans and Multi Trans Metallic are heat applied Laser Transfer Paper which does not require cutting.

Press onto a wide range of hard surfaces, such as Mugs, Ceramics, Metal, Wood, Slate and Acrylic.

Note:
If you are using Multi Trans Metallic this paper needs to be printed with black ink only.
(You may need to increase the black gamma in the RIP by 10%)

Make sure you use the Multi Trans Profile in Step 1 in FOREVER TransferRIP.

You must also print this using User Type 1 for both papers.

Image

Equipment needed for successful transfer

For a sucessful transfer, you will need the following equipment:

· Teflon Sheet (To protect the acrylic from puncturing the base of your heat press)
· Heat Stabalised acrylic (for this example we are using 8mm thick)
· Matt finishing paper (to protect the print from the press)
· Thin silicone pad (If you don't have one, a rubber matt should work but will require longer press time)

Image

Press

Press your acrylic at (150°c (302°f)) for 30 seconds.

Once finished, place your acrylic under something heavy like a stack of books for for 5 minutes.

Image

Peel

Peel the transfer from your acrylic when cold.
Post Reply