Print the transfer paper with your Laser Printer. Light is a heat applied Laser Transfer Paper for pressing onto white or light cotton, polyester or polycotton fabrics.
Using a cutter/plotter or scissors to trim the transfers will reduce residual impact.
If you are to use a Graphtec CE7000, use the displayed settings.
Position the transfer onto your substrate and press for 10 seconds at 190°c (374°f).
Peel the transfer paper from the garment in a smooth, fluid motion; from one corner to the opposite.
Once the transfer paper has been removed; cover the print with a sheet of Finishing Paper and press for 3 seconds at 190°c (374°f).
The transfer is complete.
Max wash 40°c
Do not tumble dry
Iron from reverse
Do not bleach
Note: Stretch marks in the print can be remedied by ironing inside out from the back, or by ironing over the top with a covering of parchment/baking paper.