My Account
. Transfer Paper Equipment Vinyl Packages Help Guides
Free Next Working Day Delivery on Orders Above £130 excluding VAT, UK Mainland Only
TransferPaper.com - Magnet Media

Sold in packs of 25.

$36

IColor Magnetic Media is available in letter and tabloid sizes in a matt white vinyl finish with a thickness of 15 mil (.015”). It is water resistant due to the vinyl coating and is more durable compared to paper. This product was specifically designed to work with all iColor transfer printers, and will also work with many popular laser or LED printers - please check with your printer manufacturer for compatibility. Print your own custom magnets and apply onto any metal surface where ordinary magnets would stick. Use the entire sheet for one large magnet, or print several designs on one sheet and cut manually with sharp scissors or with your preferred plotter or craft cutter.

Cutter Settings

If you are using a Graphtec CE7000, set the FORCE to 38.

The aim is to cut entirely through the sheet; so please use a Cut Mat for cutting Magnet Media.

See This Link for a guide to configure your cutter as shown.

Create Sheet

Create a new page and place your artwork.

Make sure you have your leave adequate space around the artwork to place crop marks for cutting.

Cut Prep

Draw a rectangle around the artwork to use as the placeholder for placing registration marks then navigate to:
File > Cut Master 4 > Registration Marks

Registration Marks

Select "Convert Rectangle" and press OK.

Print

Magnet Media is a print and cut Laser Transfer Paper; it's magnetic.

Print on Ultra Heavy 3 or Labels 2.

Cut Path

Duplicate the print layer and name this new layer "Cut" (using layers allows greater control over artwork manipulation).

Select all elements on the Cut Layer and use Pathfinder to merge all elements (Window > Pathfinder).

Change the colour of all elements on the Cut layer to black.
Make sure no part of the artwork is too close to the crop marks; the sensor on your cutter will get confused.

Then navigate to: File > Cut Master 4 > Cut/Plot

Load and Send

Load the media onto your Graphtec CE7000 and position the head over the bottom right registration mark and press the "Origin" button on your cutter.

Then navigate to the Layering tab in Cut Master 4. Ensure only the Cut Layer is checked.

Then click SEND and press OK.

Done

Your Window Cling is now ready for sticking onto stuff.

Watch the Video

By using this website, you consent to the use of cookies in accordance with our Privacy Policy.
OK